Professional Painting Contractors Forum banner

Driveway Sealer Estimate

13K views 10 replies 8 participants last post by  painttofish 
#1 ·
one of my past customers wants me to seal her driveway...it is in good condition, no cracks or anything.....although i have done this in my own home one time, i dont have a clue as to how to estimate this job.....i dont rmember how long it took me whn i did mine, not to mention the interuptions (kids) that made me have to keep stopping.....i know what the materials will cost me, but dont know what the "going rate" is for somthing like this.....anyone have any suggestions
 
#2 ·
Well, first you need one of these:


Then maybe you could consider charging "The Going Rate"

Seriously, you are talking a DIY quality driveway sealing with that "out of the fiver" stuff, and if you are even considering charging for applying that, then what the professional driveway sealers are charging in your area, and how long a pro would take to do the job, has very little in common with what you should be charging and how long it would take you

I'd suggest handing it off to a professional asphalt sealer
 
  • Like
Reactions: Workaholic
#6 ·
Meo,

If you have the right tools, you can charge about $1 or so per sq ft and make money. If you have a hydroscrubber and a good pressure washer you can finish 1000 sq ft in less than two hours. Sherwin Williams has two new water repellents that are super easy to use and work tremendously well. These products are a 40% siliane and a 7% siloxane. You can use them on any kind of masonry - concrete, brick, stone, stucco, block. No asphalt. They don't change the appearance of the surface either. You can apply this with brushes, rollers, airless sprayer and even a pump sprayer. They wont mar glass or flasing either. You just spray on and leave it. easy. The silane is much stronger but it costs more, contains high VOCs, and can hurt plants. The siloxane has zero VOCs and is "green friendly"
 
#10 · (Edited)
Meo,

If you have the right tools, you can charge about $1 or so per sq ft and make money. If you have a hydroscrubber and a good pressure washer you can finish 1000 sq ft in less than two hours. Sherwin Williams has two new water repellents that are super easy to use and work tremendously well. These products are a 40% siliane and a 7% siloxane. You can use them on any kind of masonry - concrete, brick, stone, stucco, block. No asphalt. They don't change the appearance of the surface either. You can apply this with brushes, rollers, airless sprayer and even a pump sprayer. They wont mar glass or flasing either. You just spray on and leave it. easy. The silane is much stronger but it costs more, contains high VOCs, and can hurt plants. The siloxane has zero VOCs and is "green friendly"
$1 a sq. ft.? Assuming its an asphalt driveway...youll be pressed to get .25 a sq....for $1.50-1.75 they can get an asphalt resurface
 
#7 ·
We're actually doing testing on these products right now. My best assessment right now is that Gardner Gilsonite is a very good product for this type of project, but of course, that is simply my guess based on what I think. (We're looking at like 30 of them and our parking lot is a mess!) Make sure that it will be suitable for your needs first though!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top