Hello everyone! I have an issue with this product I've never used before, Emerald urethane. Long story short, I'm fixing a couple of doors that have some brush marks on em and the finish needs to be spray finish, with the Emerald urethane. So I try what I know usually works for me in obtaining a smooth finish, I wet sand the areas. Although when I do this, i am getting white build up from the urethane paint that almost becomes pasty. Am I not to wet sand it or even just sand it if it's not cured completely? I wiped off the residue before I sprayed the doors. I gave 2 light coats but only let 1st coat dry for maybe 20 mins. Brush Mark's were still slightly visible but looks like I created a diff problem as the spray left an almost fog look. Keep in mind that I didnt paint the doors originally, I'm just fixing these doors that another painter did.
Any suggestions on what to do would be greatly appreciated. What size tip do I use and how do I go about sanding these areas?. I'm using a 320 grit. Thank you
The topics covered on this site include activities in which there exists the potential for serious injury
or death. PaintTalk.com DOES NOT guarantee the accuracy or completeness of any information contained
on this site. Always use proper safety precaution and reference reliable outside sources before attempting any construction or remodeling
Read the back of the can for application instructions? 20min dry time for a modified urethane is not enough. You better have a perfect surface, these new modified alkyds contour to the surface like glass and show every imperfection, BM advance is the worst in this regard