Professional Painting Contractors Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. General Painting Discussion
    Hi Paint Talk community, I've seen a number of threads with similar issues where great advice was provided here. I'm hoping you all can help guide me with my issue - pictures attached. I recently purchased a home that was heavily smoked in. Our process was: Cleaned the walls and ceilings with...
  2. Interior Wood Finishing
    Anyone use centurion under milesi 1k? We currently use bin but would like to spray without any possible combustion issues Anyone got experience using 1106 centurion vinyle sealer to replace bin? Appreciate any feedback
  3. General Painting Discussion
    Hey there, any advice on painting laminate floors. Client wants me to clean up a job that some else did. Seems when the client put his furniture on the newly painted floor it scratched and you can see through to the laminate. Was told they used BIN and floor paint. I'm thinking rough the...
  4. Interior Wood Finishing
    A couple of years back we had a customer who really wanted their knotty pine walls painted vs. stained, so we did the work. We applied BIN shellac over the knots to seal them, then a coat of Ben Moore all-purpose primer before painting. The customer was home during the project and fumes were a...
  5. General Painting Discussion
    Hey Guys, I'm coming up to a fire restoration job where I'll be using a full face respirator. The government contractor is setting up negative air ventilation to assist with keeping vapors to a safe level. My concern is the overspray while doing the deck. Will rinsing and rubbing with...
  6. Specialty Coatings
    Hello. I want to apologize up front about not being a true painting contractor, and asking a "how to" question. I am in the process of buying a home that had a good deal of smoke damage and will be restoring it myself. My plan is to gut the home to the studs and baking soda blast all...
  7. Surface Preparation and Application
    Long time reader, first time poster. I have a couple questions about BIN flash, maybe you guys have a better idea about than me. I typically BIN knots twice and then prime with oil and finish with 2 coats of paint, I am not really satisfied with the results and would like to have the finish...
    bin
1-7 of 7 Results
Top