Professional Painting Contractors Forum banner

applying poly to new floor

4584 Views 10 Replies 9 Participants Last post by  Joewho
Hey guys, whats up?.. I am finishing a 300 square foot southern yellow pine floor for the first time. Just a question for the table- Would you use a brush, lambs wool applicator, and/or both? I have not used the lambs wool before. I am thinking the size of the floor might not warent the lambs wool. I am also thinking about using minwax fast dry poly for floors. Any other suggestions? Thanks :drink:
1 - 1 of 11 Posts
If you are going to apply poly, go with oil base.
I also recommend that you use lambs wool. it will help reduce air bubbles.
Do not shake the can, just stir with paint stick slowly.
If you can, have the home owner turn off the humidifier. Again, this will help reduce air bubbles. :)
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.