I guess? What product and how many wet mils? Too many variable to give a definitive answer.

 

Is that new drywall? Like NC said, it depends how thick you are applying the paint!

 

It is actually latex enamel undercoat on MDF wall panels. not quite sure how to measure mil thickness, but it is a nice even wet coat using a 414 tip. Is that any more help?

 

NC Paint,
What kind of coverage can I expect to get from Aura and Regal on a properly prepped MDF wall panel with a sprayer? hopefully in 1 coat.

 

Read the TDS on the primer and then do the math. Do the same with your topcoat.

 

If after you do the math and consider all the variables mentioned above and it still turns out that it's low you could have the wrong tip too. It could be old. If you have a .015 size tip that you've sprayed 600 gallons through chances are that tip is about the size of a .019 by now.

 

Use a WFT gauge

Theoretical coverage: SF/gal.=1600X%SBV/DFT

DFT=WFTX%SBV/100

WFT=DFTX100/%SBV

 

 

NC Paint,
What kind of coverage can I expect to get from Aura and Regal on a properly prepped MDF wall panel with a sprayer? hopefully in 1 coat.

Good.......

Or bad

I guess it depends on how well you apply it