Professional Painting Contractors Forum banner
1 - 5 of 5 Posts

·
Banned
Joined
·
52 Posts
is that powder coating????
no its not, there is no heat involved. but it does involve positive and negative charged particles.

-----------

the link you posted are the most common units you'll see out there;

and all e.s. units are portable except for the custom built ones you see in factories.

define:

the airless units produce a much higher psi at the tip which has a very very very small bore. the gpm is 1/4 of the average airless. the atomization at the tip is 30X the average airless.

they are very expensive and unless you are "in" the e.s. finish field, they aint worth the investment.
 

·
Registered
Joined
·
558 Posts
Discussion Starter · #4 ·
My goal was to find out if something like that could be used in the commercial business. More specifically, would those types of units be good for metal doors, metal stair ways etc. and would it leave a smooth finish.
 

·
Banned
Joined
·
52 Posts
My goal was to find out if something like that could be used in the commercial business. More specifically, would those types of units be good for metal doors, metal stair ways etc. and would it leave a smooth finish.

it would be fine for your tactic
 
1 - 5 of 5 Posts
Top