Professional Painting Contractors Forum banner

Heat gun preference?

1978 Views 3 Replies 4 Participants Last post by  Wolfgang
I have to strip flaking black paint off of a corrugated galvanized divider on a hi rise balcony. The divider has vertical slats that are not flat, but have some curves in them. I was thinking of getting most of the paint off with a heat gun, then sanding whatever is left. Does anyone here have a favorite choice for a heat gun for paint stripping? I am thinking of getting one that is light because I will be standing the whole time. I have 2 heat guns, but I can't find them! :(

futtyos
1 - 4 of 4 Posts
I think the one I have is a wagner and it has adjustable temps, 2 speed fan and a cool down setting.

Sent from my SAMSUNG-SM-G870A using Tapatalk
  • Like
Reactions: 2
I think the one I have is a wagner and it has adjustable temps, 2 speed fan and a cool down setting.

Sent from my SAMSUNG-SM-G870A using Tapatalk
I think mine's a Wagner also. Probably the same one, I dunno. Never really use it.lol sounds like that might be a good project for one though futtyos.:)

Sent from my SM-G930V using Tapatalk
After going through a number of Wagners I switched over to Milwaukee. Built tough, take abuse, and just keep going.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top