Professional Painting Contractors Forum banner
1 - 8 of 8 Posts

· Banned
Joined
·
201 Posts
Discussion Starter · #1 ·
A friend of mines wife changes paint colors in her home twice a year in various rooms after she gets a wild hair after one of those trading, design, or flip this that and whatever shows. Just how many layers can the sheetrock take? I think she must have a ¼” layer on there by now.
 

· Banned
Joined
·
201 Posts
Discussion Starter · #3 ·
I've been told paint dries to 2 mils (two thousandths of an inch).
Assuming 2 coats (4 mils)
1/8" thickness = 31 (two-coat) paint jobs.
Well, I never realy checked the thickness, but she has been putting allot of coats on over the years and I was wondering if there comes a point when too many layers of paint on sheet rock becomes an issue?
 

· FT painter/FT dad
Joined
·
1,254 Posts
Those walls are fine! My mother in law changes colors twice a year and also throws wallpaper up on the same walls occasionally. I would think they only get stronger..
 

· Registered
Joined
·
14,407 Posts
Well, I never realy checked the thickness, but she has been putting allot of coats on over the years and I was wondering if there comes a point when too many layers of paint on sheet rock becomes an issue?
Eventually the layers of paint build to a thickness that puts them flush with the trim in the room. At this point, its a problem!
 

· Registered
Joined
·
169 Posts
Eventually the layers of paint build to a thickness that puts them flush with the trim in the room. At this point, its a problem!

Last time I came across this, we pulled the base, prepped the walls and mudded the bottom bevel, sealed, and re-installed the base, dapped the top edge and finish coated. Door and window casings were fine as the outside edges are thicker then the top of the base.

Cheers
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top