[stansoph]

This is a video of a guy painting a 6 panel door; it is not me. If you could watch and see if you see any glaring errors and a general critique.

Mods if posting this link is a No No please kill it.

 

[Rich]

A bit slow and not as meticulous as myself. He played with those little panels for an hour. He overshoots on the long runs, hope that doesn't dry too fast-he'll have paint running against the grain. Overall score=6.5

He's better than a HO though :thumbsup:

 

[Kelly Painting]

He was suppose to do all the insides first..then use a hot dog roller for the outsides....and I didn't like his attitude...and where is his kiddie pool?

 

[DelW]

If he'd quit wiping all the paint off his brush off every time he dipped he'd get it done faster. But hey, at least he took the door knob off.

 

[Workaholic]

To slow for an interior/exterior fiberglass door. Also i think his brush choice was to small .jmo

 

[Joewho]

Too slow, rails should be last.

 

[ProWallGuy]

I've seen that guys videos a couple times. I won't comment on if it right or wrong; to each his own. But I did notice he had the comments disabled for his videos. Most likely got hammered by those who thought (or could) do better. He is the same as JackPauhl, the blog someone else posted about here today.

 

[paulingrad]

that was painful to watch.

 

[cole191919]

I think I would rather spend my time watching someone paint behind a toilet than watch this again...

 

[ProWallGuy]

I hate to say it but ever since this video was posted, I've been thinking of setting up the cam at a job a get a video of me doing the same thing. Give you all something more to laugh at. :yes:

 

[stansoph]

I hate to say it but ever since this video was posted, I've been thinking of setting up the cam at a job a get a video of me doing the same thing. Give you all something more to laugh at. :yes:

A video of you painting a door would be welcomed by me. I have to learn from any and all sources as I am self-taught and have little exposure to pro painters.

 

[vermontpainter]

I hate to say it but ever since this video was posted, I've been thinking of setting up the cam at a job a get a video of me doing the same thing. Give you all something more to laugh at. :yes:

A video of me painting a door would be inconclusive as the camera would either run out of storage space or battery power before I was through.
Sloooow...like a herd of turtles.

 

[ProWallGuy]

A video of me painting a door would be inconclusive as the camera would either run out of storage space or battery power before I was through.
Sloooow...like a herd of turtles.

I don't think I'm slow as that, but surely not the fastest either. I'm sure my camera would last the duration, but concerned that it might be a pretty big file to upload. I do know that I will be hanging a big mural up in a casino in PA in a couple weeks, and we will be taking some video of that.

 

[jack pauhl]

(laughing) you guys suck! Bring it!! Post em guys, lets see. I forget now what was used on that door but look at those bevels! I bet it was ICI 1407 semigloss. Figure cut that time in half for the other easy fiberglass doors.

 

[PVPainter]

I usually bid a door for about 2 days labor

 

[vermontpainter]

Me too.

 

[vermontpainter]

http://www.youtube.com/watch?v=12odICjAnQc
Mods if posting this link is a No No please kill it.

Wowser.

 

[NEPS.US]

It's alway a neat idea to post a pic of a sprayed door and claim it to be the one you brushed (with poor technique) in a video over a year ago.

 

[NEPS.US]

The video is a left hand swing door and the pic is a right hand swing. Beat it.

 

[vermontpainter]

The video is a left hand swing door and the pic is a right hand swing. Beat it.