Hello!
I just sprayed emerald urethane on a painstaking oak railing system with a Graco hvlp. Was not asked to fill all the grain as they liked the wood look.
Sanded, sprayed bin, sanded, top coated X2 but the flats between the spindles on the bottom ended up with some overspray grit.
Am I hooped and need to resand everything and top coat again with an overspray shield or could I lightly sand with 400 the bad areas and use like a buffing wax or something?
Thanks for your help
[ATTACH
![Fixture Wood Interior design Stairs Building]()
type="full"]115253[/ATTACH]
I just sprayed emerald urethane on a painstaking oak railing system with a Graco hvlp. Was not asked to fill all the grain as they liked the wood look.
Sanded, sprayed bin, sanded, top coated X2 but the flats between the spindles on the bottom ended up with some overspray grit.
Am I hooped and need to resand everything and top coat again with an overspray shield or could I lightly sand with 400 the bad areas and use like a buffing wax or something?
Thanks for your help
[ATTACH
