Professional Painting Contractors Forum banner
41 - 41 of 41 Posts

·
Registered
Joined
·
1 Posts
Are you using the new FFLP tips? If so, did you change out the rear seat and rubber seal? If not that will be the reason for spits. Or you might just have something caught in between the needle and diffuser. If you used BIN then you cleaned with alcohol and might have dislodged something from in side the gun. I will take the tip off then run material back into the bucket for a minute or so and that takes care of the problem. I tried the 310 with DE evershield flat for eaves and gutters, but couldn't get it to spray right, the regular 311 worked great.
I took the rear seat and rubber washer apart rinsed it off and reset it. Works fine now
 
41 - 41 of 41 Posts
Top