Professional Painting Contractors Forum banner

Renner Primer under BM Advance & SW Emerald Urethane?

781 Views 3 Replies 4 Participants Last post by  Rad Dezign
I have 2 gallons of Renner 648 that are going to go to waste unless I can use them with some other paints that need to use on a project.

I am going to be using BM Advance and SW Emerald Urethane soon, and was wondering if the Renner 648 water-based urethane would be an appropriate primer to use for either of these.

Any thoughts?
1 - 1 of 4 Posts
I haven't tried that combo but I bet it would work fine. The Renner dries very hard so I don't think it would be moving much underneath the top coats. Probably wouldn't hurt to do a couple test doors though.
  • Like
Reactions: 1
1 - 1 of 4 Posts