Quick sprayer question: does anybody spray BIN shellac primer through their airless sprayer? Particularly the Titan 440. I’ve heard that clean up can be a hassle...I think I’ve heard that some guys (when doing cabinets) have two setups-an oil setup and a another setup-can’t remember exactly if it’s shellac or lacquer.? Any tips/things to be aware be be appreciated.
Shooting BIN through Airless
1 - 6 of 6 Posts
Joined
·
2,423 Posts
Its alcohol clean-up or use amonnia for cheap, but stinks. Nothing different than loading up cover stain then cleaning with paint thinner. I always run a some pump saver or krud kutter diluted through to clean it out good, no filters with this step.
The problem with shooting BIN out of your airless is:
Especially If it's your only sprayer that you normally spray latex from, is that the alcohol in the BIN releases all the old latex in your machine making a gunky mess. I only shoot BIN from my hvlp. Minimal cleanup. Unless you have a clean airless Rig dedicated to BIN and oil. Alcohol wont bite into the oil products like it does to latex. Did it once and spent all day cleaning my machine.
Especially If it's your only sprayer that you normally spray latex from, is that the alcohol in the BIN releases all the old latex in your machine making a gunky mess. I only shoot BIN from my hvlp. Minimal cleanup. Unless you have a clean airless Rig dedicated to BIN and oil. Alcohol wont bite into the oil products like it does to latex. Did it once and spent all day cleaning my machine.
1 - 6 of 6 Posts
