Professional Painting Contractors Forum banner

Spraying and office re-fit

2393 Views 5 Replies 3 Participants Last post by  Canadian Mike
Hi folks - I've got 17000 sq ft of a new office renovation to paint. There will be plenty of new drywall and the ceilings will all be new (no office drop ceilings). I'm definitely going to spray the 8000 sq feet of ceilings, but my question is...Does anybody have some techniques or technical advice for spraying some, or all, of the walls too?
1 - 2 of 6 Posts
If your spraying ceilings then you cannot spray wall too.

If you want to spray walls then do that first, then mask off the wall with 99" plastic from the ceiling and spray the ceiling.

If you want to spray the ceiling first, then you will need to roll and and cut the walls.

What ever you do, be sure to prime everything first, if the mud/texture guys didn't already.

I am not sure what other options are available for your situation.
ps. I'm talking about top coats because I'm going to spray the primer on everything.

Good! :thumbup:
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.