Professional Painting Contractors Forum banner
1 - 3 of 3 Posts

· World Champion
Joined
·
233 Posts
Discussion Starter · #1 ·
i have a 20'T by 75'L Flat Wall to paint. I have a lift to get me high up, and i also have a sprayer and plenty of rollers.

My question is what would the best way to Paint this big wall to reduce flashing?

I would think the best way would be, have one guy up on the lift rolling the top 10' and another guy on the ground rolling the bottom 10'. and just have them follow each other to keep the wet edge. Maybe even add some paint conditioner to extend the dry time.
 

· Registered
Joined
·
317 Posts
16 ft pole, 18 " roller, water down the paint 10-15%, it will give you enough wet time, you only need one guy in the lift spraying, and one guy rolling, or even 2 guys high and low spraying. i wouldnt recommend 2 guys rolling it in sections because smooth wall will flash on you, your best bet is one even pass all the way down with the roller. if he cant reach the top you can roll the top down a few feet then roll up into it from the bottom, it feathers better that way
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top