Professional Painting Contractors Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
431 Posts
Discussion Starter #1
I had a genius idea today. Why not mask a spray shield with masking paper and tape. I got tired of washing it off so I just masked it with multiple layers of paper. Side note try leaving a folded piece of tape after each layer so you can grab it with your gloves on.:wallbash:
 

·
Registered
Joined
·
527 Posts
I make my own sheilds out of cardboard, and put yellow tape over the spray edge. When it's "gummed-up" I tape it again ... with yellow tape. Smash it down to make it smooth, and use a make shift handle (scrap base board).

Drying over night helps ... so I make up a few at a time.

I love your idea, so I'll "product test it" on a Chicago Union job.

Thanks for the idea!

GURU
 
1 - 9 of 9 Posts
Top