Professional Painting Contractors Forum banner
1 - 20 of 31 Posts

· Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
I had a chance this past week to work with some friends on a new home. They had talked about their 3-foot sawhorse ladders that they absolutely loved and I was sold pretty much immediately once I started using one. It was the perfect solution for cutting both 8- and 9-foot ceilings without constantly moving the ladder, since I was able to cut about five feet at a time. Also, the 30-inch long and about 10-inch wide top step gave me solid footing when doing 9-foot ceilings. So to me, it was like having a mini-platform as opposed to feeling restricted by a step ladder.

But before I start leaving my 5-foot step ladder at home to go buy the 3-foot sawhorse, I want to find out what some of you consider your favorite, all-purpose painting ladder for 8- and 9-foot ceilings?
 

· Registered
Joined
·
29 Posts
I've used a saw horse ladder before. They are nice. I like to use the Warner 2 foot step ladder. But as long as I can reach, I actually prefer a five gallon bucket to a ladder. That only works if I'm doing new construction or I'm on a Vinyl floor, or some kind of hard flooring. On a bucket I can just keep on moving with out getting off. I just walk the bucket were I want to go. Good balance required.
 

· chief bucket carrier
Joined
·
277 Posts
yikes on that 5'er!

I've used these werner platforms before
:thumbsup: werner platform works great!! lightweight, wide enough so you only have to move it a couple of times per wall...makes me want to cut in a ceiling just thinking about it:)
 

· Registered
Joined
·
18 Posts
My lunch box. I always bring my lunch in a plastic cooler which is the ideal height for reaching everything in rooms with 8' ceilings. I just slide it around with my foot and have the occasional snack as well:thumbup:.
 

· FT painter/FT dad
Joined
·
1,254 Posts
That 5'er comment screams OSHA...hope no new construction is being done

They have eagle eyes for those 5's
 

· FT painter/FT dad
Joined
·
1,254 Posts
Yeah...was painting some Navy housing years ago and remember someone getting absolutely reemed out because of a 5'er. I guess I was just trying to give you a heads up

I had a guy from OSHA stop and yell at us once because of our ladder pitch...we shrugged it off, but he had a point, we we're pushing it
 

· ....
Joined
·
4,698 Posts
Unique features & benefits: Bucket Stilts are similar in concept to snow shoes or skis in that you place each foot in a recessed area of a round plate made of thick plastic resin. Velcro straps secure a person's foot to the top of each plate. Each plate fits on the end of any 5 gallon utility bucket, which is securely attached to the plate with four adjustable straps.
Designed for the professional contractor and the week-end do-it-yourselfer, Bucket Stilts elevate the user almost two feet off the ground in order to perform overhead work like painting, wallpapering, cleaning, dry walling/sheet rocking, texturing/finish work or framing. Because they're lightweight and are fastened to each foot, the user has complete balance and stability which leaves both hands free for work! The user can walk around on Bucket Stilts with full mobility to move backwards, sideways or at any angle. The design makes them easy to mount and dismount without any training or practice. One size fits all and any kind of tennis shoes or working shoes can be worn since they do not require any special footwear. They have no moving parts and do not require any maintenance. You can add more height by stacking buckets on top of each other, and a special device can be mounted under the bucket to increase the height in 6 or 12-inch increments. Conventional stilts sell for about $300. Bucket Stilts are expected to sell for $20 to$25 per pair.





http://www.inventionconvention.com/
 

· Registered
Joined
·
30 Posts
Discussion Starter · #17 ·
Well, I went and bought the 3-foot sawhorse ladder I had used while painting with my friends. What an awesome ladder to work with! I can reach over twice the distance with that thing than with a step ladder when cutting, and it's less cumbersome to move than a step ladder. Also, on a step ladder, resting the bucket on the top platform means the constant risk of a spill because it's right in my way, but on the sawhorse the bucket is always well out of my way; I'll put my bucket on one end of the wide top step then move it to the other end as I move along the ladder.

I can't say enough about this ladder! I'll bet that most people who rent one for a day will probably wonder how they got along with a step ladder, then go out and buy one of these! Just my two cents worth, but I get excited when a new piece of equipment makes my job easier and faster.
 

· Registered
Joined
·
37 Posts
Love the werner platform pictured above. I have two of them and put them one after the other. I had my son on the job site helping one time...I cut in the whole room and never stepped down one time...he would leapfrog them around the room for me.

I also love my 6' quick folding ladder...it has that handle in the middle so you can close it and carry it off in one step. Lightweight and extremely sturdy.
 
1 - 20 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top