Professional Painting Contractors Forum banner
21 - 28 of 28 Posts
Most paints are a 2 coat system. However I can get Advance looking like perfect glass even after 1 coat. Sometimes I'lll 1 coat the backs and double coat the fronts..I always read TDS sheets. In fact Im fascinated by them.

One thing about the Advance I haven't seen mentioned here is it's a 2 coat system. You have to spray doors and cabinets one way, no crossing them out and put a medium coat on. The trick is waiting 12 hours (or at least over night) and apply a second coat the same way and it looks like glass.
 
Why aren't you guys using cabinet specific paint? I will put up SW Hydroplus against anything BM has, the only downfall is the dry time. The KEM Aqua is better than anything BM has for cabinets and has a dry time of about 15 min. Oh the reason I like spraying flat is the above mentioned paints are self leveling so if you spray a little heavy you don't get any sags or runs.
 
Why aren't you guys using cabinet specific paint? I will put up SW Hydroplus against anything BM has, the only downfall is the dry time. The KEM Aqua is better than anything BM has for cabinets and has a dry time of about 15 min. Oh the reason I like spraying flat is the above mentioned paints are self leveling so if you spray a little heavy you don't get any sags or runs.
KA+ is fairly thin and runny. You really have to be careful and the micro bubbles can be an issue.

Sherwin Williams also owns Sayerlack Hydroplus which is a much better waterborne lacquer. It was created in italy where all the best water-based cabinet grade paints are made.
 
*I usually paint one side at a time also. Has anybody else used these? I have two sets, and they come in a duffle bag. Highly recommended as a portable (and permanent) setup.

https://erecta-rack.com


Oh my god I was JUST talking about building something similar the other day!

I’ve seen a cheaper version on Amazon and thought the idea was brilliant since I almost always need to tear down at the end of each day since trades will be in the next day. Was tryin to think up a way to have my buddy create a blank to make the end caps quickly & use piping between them...thanks for the link!
 
21 - 28 of 28 Posts