Check the expiration date and in general, under what conditions it was stored. I had a similar case with a web. The paint stood in a cold warehouse for a very long time.
PPG Hi-Temp 1027
We are building a material handling system for a heat treat furnace. The customer recommended a paint that is no longer available and PPG recommended we switch to a Hi-Temp 1027 paint. We tried to spray today and the paint is coming out a bit like spider webs. I'm personally not the painter but I'm the one responsible for making sure things get painted, so here I am.
We are using a Binks gravity feed spray gun and running around 80 PSI. Our PPG rep said to thin the paint but we have already thinned it quite a bit. Just wondering if anyone had any other suggestions I could have the guys try. I dropped a few pictures below to show what we are getting.
Any Help would be appreciated. Thank You,
![Grey Water Tints and shades Pattern Rectangle]()
![Grey Road surface Asphalt Concrete Pattern]()
![Road surface Grey Asphalt Concrete Tar]()
We are using a Binks gravity feed spray gun and running around 80 PSI. Our PPG rep said to thin the paint but we have already thinned it quite a bit. Just wondering if anyone had any other suggestions I could have the guys try. I dropped a few pictures below to show what we are getting.
Any Help would be appreciated. Thank You,
